Filter
Top Products
Operating Your System
Using Caller ID (Continued)
To dial a number in the caller list:
1 Follow the instructions on the previous
page for viewing the caller list.
2 Lift your handset, or press DIAL, or
SPEAKER, or HEADSET, or a LINE but-
ton when the desired number is dis-
played.
Note that before performing step 2, you
may press the “#” button repeatedly to
scroll through different choices for dialing
that number, either with our without the
area code or a “1” in front.
To delete numbers from the caller
list:
1
While viewing the caller list, press the
DELETE button twice when the desired
number is displayed,
OR
press the DELETE button and keep it
depressed for 5 seconds to delete all
the numbers in the caller list.
Note: In addition to being able to delete
any and all records from your caller list, you
can decide whether calls are stored in the
first place. You may choose separately for
each line at your phone. To do this, press
PROGRAM, then NEXT until you see
“Caller ID Store”, then press ENTER. Press
CHANGE if you wish to change the setting
for Line 1, and then press NEXT and
CHANGE to view and change the settings
for Lines 2-4.
When you dial a number from the caller list, the
telephone will dial it as it is shown in the display,
with a “1” and the area code. If you need to dial
it in a different way, press the “#” button to scroll
through different choices for dialing the number
before going off-hook or pressing DIAL.
Entering Area Codes into your Epic
telephone
You may also enter area codes into your EPIC
telephone so that telephone numbers are dis-
played properly, enabling you to dial numbers in
the caller list without having to press the “#” but-
ton first.
You may enter one HOME area code. Use this
feature if you only need to dial the seven digits of
the telephone numbers for calls in your own area
code. After you program your home area code,
when you receive a call from within this area
code, the screen will display only the seven dig-
its, and only those seven digits will be dialed out.
You may also enter up to six LOCAL area codes.
Use this feature if there are certain area codes
that require you to dial the area code plus the
seven digits, but without the “1” in front.
In addition, you may enter up to six “1 PLUS 7”
area codes. Use this feature if there are certain
area codes that require you to dial a “1” plus the
seven digits, but without the area code.
To enter your HOME, LOCAL, and “1 PLUS 7”
area codes, press PROGRAM, then press NEXT
until you see “Area Codes” in the display, then
press ENTER. You will see the HOME area code
setting. Press CHANGE if you wish to change
this setting, or press NEXT to view the LOCAL
and “1 PLUS 7” area code settings. Press
CHANGE whenever you wish to enter a new
code or change a currently stored code.
ET4000 UG for PDF v8 062502.qxd 6/25/02 12:52 PM Page 43