Filter
Top Products
8
Until a telephone is assigned a station number,
the telephone will not operate, and the display
will read “Station #??”. To assign this telephone
a station number, simply press the soft key under
CHANGE repeatedly until the desired station
number is displayed.
It is important to connect the telephone to the
telephone lines before
pressing CHANGE, so
that the phone can check other existing sta-
tions in the system, and avoid offering you a
duplicate station assignment.
Note: One phone in the system must be set as
Station #11 in order for all the system features,
such as shared directory dial, to function.
Using Station Names
If you wish, you may also assign your station a
name (See page 57). Then, people will see your
station’s name when you call them on the inter-
com.
Assigning Station Numbers
Each station must be assigned a different station number.
Installing Your System
To assign a station a number:
1 Press PROGRAM.
- The display will read “Program...”
2 Press the soft key under NEXT.
- The display will show the currently
assigned station number.
3 Press the soft key under CHANGE
repeatedly, until the desired station
number is displayed.
The choices are Station #11 through
Station #26.
4 Press PROGRAM to exit.
You may follow the above steps at any
time if you wish to change a telephone’s
station number.
Note: If you are connecting your tele-
phone for the first time, the telephone
automatically starts at the station
assignment screen, so you begin with
step #3.
ET4000 UG for PDF v8 062502.qxd 6/25/02 12:51 PM Page 18