Filter
Top Products
Setting Up Your System
To set system call privacy
on/off:
At Station #1
1:
1
Press PROGRAM.
- The display will read “Program...”
2 Press the soft key under NEXT
repeatedly, until “Advanced Setting”
appears in the display, and then
press ENTER.
3 Press the soft key under NEXT until
“Call Privacy” appears in the display,
and then press ENTER.
The display will show the current
Call Privacy setting
4 Press the soft key under CHANGE
repeatedly, until the desired call pri-
vacy setting is displayed.
The choices are:
Call Privacy:ON (factory setting)
Call Privacy:OFF
5 Press PROGRAM to exit.
Note: Even if you set Call Privacy on,
people will still be able to turn Call
Privacy off during a call if they wish by
pressing the CONFERENCE button.
(See page 39)
Setting System Call Privacy On/Off
The Call Privacy feature is set at Station #11,
and this setting governs the entire system.
There are two possible settings:
CALL PRIVACY ON: This is the initial factory
setting and when this is set nobody can pick up
their station and join or listen to your conversa-
tion unless you first release the call privacy by
pressing the CONFERENCE button. This fea-
ture helps prevent eavesdropping and the distur-
bance of people accidentally interrupting your
telephone conversations.
CALL PRIVACY OFF: This setting is useful for
people who find the call privacy feature unnec-
essary or inconvenient. In some businesses,
people prefer to be able to pick up other stations
without the privacy having to be released first or
having to be conferenced to the line.
Note: There is always call privacy on intercom
calls regardless of your system call privacy
selection. People at other stations cannot listen
in to your intercom conversations.
18
If you set your system call privacy ON,
you may still press the CONFERENCE
button at any time during a call to
release Call Privacy
ET4000 UG for PDF v8 062502.qxd 6/25/02 12:51 PM Page 28