Filter
Top Products
RUIM CHV1 (RUIM Models Only)
If your SX6P requires an RUIM, this setting allows you to enable, disable or change its PIN, also
called the CHV1 (Card Holder Verification 1).
This menu option is not available if your SX6P is bonded to a RUIM.
1. Start by pressing MENU.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 4: RUIM CHV1.
5. Select the desired option and Press STO.
6. Enter the SX6’s PIN.
7. If you are changing the PIN, enter the new PIN.
Auto Lock
The Auto Lock setting determines whether the phone will automatically lock. This would require
you to enter your lock code before being able to access the phone.
1. Start by pressing MENU.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 4: Auto Lock. (5 on RUIM models)
5. Select the desired option and Press STO to save.
User Defaults
This setting is used to reset the SX6’s settings to the user default values.
1. Start by pressing MENU.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 5: User Defaults. (6 on RUIM models)
5. Select RESET and Press STO to save.
Software Version Information
1. Start by pressing MENU.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 6: SW Version Info. (7 on RUIM models)
Software Version Information
1. Start by pressing MENU.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 7: Hot Line. (8 on RUIM models)
5. Select Enable (followed by phone number to dial automatically & STO) or Disable.
Phonecell
®
SX6P CDMA 19 User Manual