Filter
Top Products
Phonecell
®
SX6P CDMA 4 User Manual
Connect the SX6P to AC Power
1 Connect the barrel connector of the power supply to the AC power input on the rear panel of
the SX6P - see Figure 12.
2. Plug the AC power cord into the power supply.
3. Plug the AC power cord into the wall socket.
4. Check the cellular signal strength and move the unit until the best signal possible is
achieved - see the Service Indication section of this manual.
AC Power Cord
Wall Socket
Power Supply
AC Power
Input
Barrel
Connector
Figure 12 –
SX6P AC power connection.