Filter
Top Products
Self Test Cycle
The unit will perform a periodic self test to ensure the proper operation of the phone. The default
setting is 180 minutes (3 hours).
1. Start by pressing MENU.
2. Select 6: Data Settings.
3. Select 2: Self Test cycle
4. Select between 0 and 65535 minutes and Press STO to save.
RX Data Mode
To receive data, you must set the RX data mode setting.
1. Start by pressing MENU.
2. Select 6: Data Settings.
3. Select 3: RX Data Mode.
4. Select the desired setting and Press STO to save.
SECURITY
New Lock Code
The lock code is a 4-digit password used to prevent unauthorized access to the phone. This
setting will allow you to change it. The default lock code is 0000.
1. Start by pressing MENU.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 1: New Lock Code
Restrict Outgoing Calls
1. Start by pressing MENU.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 2: Restrict.
5. Select the desired option and Press STO to save.
Voice Privacy
The cellular CDMA network offers inherent voice privacy. Check with your service provider for
the availability of enhanced voice privacy mode. If Enhanced is selected, the phone will request
Enhanced Voice Privacy and a "P" will be shown on the display if Enhanced Voice Privacy has
been granted by the network.
1. Start by pressing MENU.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 3: Voice Privacy.
5. Select the desired option and Press STO to save.
Phonecell
®
SX6P CDMA 18 User Manual