Telular SX6P-200C Telephone User Manual


 
Reset Phone
This setting is used to reset the SX6P’s settings to the user default values.
1. Press [Menu] to access the main menu.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 5: Reset Phone.
5. Select RESETand press [Store] to save.
Hotline
1.
Press [Menu] to access the main menu.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 6: Hot Line.
5. Select Enable(followed by phone number to dial automatically) or Disableand
press [Store].
RUIM CHV1 (RUIM Models Only)
If your SX6P requires an RUIM, this setting allows you to enable, disable, or change its PIN
(Personal Identification Number, also called the CHV1 [Card Holder Verification 1]).
This menu option is not available if your SX6P is bonded to a RUIM.
1. Press [Menu] to access the main menu.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 7: RUIM CHV1.
5. Select the desired option and press [Store].
6. Enter the SX6P’s PIN.
7. If you are changing the PIN, enter the new PIN.
Programming
If your phone number has not been programmed into your SX6P, the programming menu allows you
to enter your phone number, or MIN (Mobile Identification Number), into the phone.
To program your phone number into your SX6P:
1. Press [Menu] to access the main menu.
2. Select 8: Programming.
3. Enter the current lock code.
4. Enter the phone number (or MIN) and press [Store].
Phonecell
®
SX6P CDMA 18 User Manual