Filter
Top Products
Security
Change Code
The lock code is a 4-digit password used to prevent unauthorized access to the phone. This
setting allows you to change your phone’s lock code. The default lock code is 0000.
To change your phone’s lock code:
1. Press [Menu] to access the main menu.
2. Select 7: Security.
3. Enter the current lock code. (The default lock code is 0000.)
4. Select 1: Change Code.
5. Enter your new lock code and press [Store] to save the new setting.
Restrict Outgoing Calls
1.
Press [Menu] to access the main menu.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 2: Restrict.
5. Select the desired option and press [Store] to save.
Voice Privacy
The cellular CDMAnetwork offers inherent voice privacy. Check with your service provider for the
availability of enhanced voice privacy mode. If Enhanced is selected, the phone will request
Enhanced Voice Privacy and a "P" will be shown on the display (if Enhanced Voice Privacy has been
granted by the network).
To set your Voice Privacy level:
1. Press [Menu] to access the main menu.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 3: Voice Privacy.
5. Select the desired option and press [Store] to save.
Lock Mode
The Lock Mode setting determines whether the phone will automatically lock. If Lock Mode is
enabled, you are required to enter your lock code before being able to access the phone.
1. Press [Menu] to access the main menu.
2. Select 7: Security.
3. Enter the current lock code.
4. Select 4: Lock Mode.
5. Select the desired option and press [Store] to save.
Note:
The phone’s default lock code is 0000.
Phonecell
®
SX6P CDMA 17 User Manual