Filter
Top Products
Connecting the Handset
Before you use can use the SX6P, you must connect the handset cable.
1. Connect the handset cable to the phone jack - see Figure 7.
2. Connect the handset cable to the handset - see Figure 7.
Wall Mounting
1.
Remove the mounting clip from the cradle and re-insert it with the tab pointing up - see Figures
8 and 9
.
2. Mark two hole locations 83 mm (3-1/4 inches) vertically apart and drill two holes into the wall.
Insert
Mounting
Clip into
the Cradle
(tab up)
Mounting Clip in
Cradle (tab up)
Figure 9 –
Handset mounting clip for wall-mount.
Remove
Mounting Clip
from the Cradle
(tab down)
Figure 8 –
Handset mounting clip assembly.
Phone jack
Handset cable
Handset
Figure 7 – SX6P handset connection.
Phonecell
®
SX6P CDMA 3 User Manual