Filter
Top Products
373 Administrator Settings
37
3.3.1 Encryption
(Country specific)
Auto
The system will try to set up calls using encryption.
If the far end system supports encryption (AES or DES), the call will be encrypted.
If not, the call will proceed without encryption. If the far end supports encryption,
the systems will initiate encryption after the call is connected (an ‘open padlock’
symbol will be displayed). When encryption has been established, a ‘closed
padlock’ symbol will be displayed.
Off
The system will not send or receive encrypted data.
Technical encryption information like encryption algorithm and encryption check code can be
found in the Call Status menu.