Filter
Top Products
3 / Making Calls
15
Protegé
®
User Guide - single line telephone
Placing an OHVACall
1. Lift the handset.
2. Dial the extension number.
3. Receive busy tone.
4. Dial 0.
5. You are connected through the speaker of the
called party.
2.Off-Hook Voice Announce
(OHVA)
Use the OHVA feature when you want to interrupt a busy extension. To be able
to perform an OHVA the called party must meet the following criteria:
1. He/she must have an Executive or Executive Data keyset.
2. He/she must be using the handset. Your OHVA call will be connected
through the speakerphone.
3. His/hre keyset must be programmed to permit OHVA calls. Your system
administrator can advise if this is the case.
OHVA is programmed at the system level to connect immediately or after a
specified period of time. This gives the called party time to reject the call
before being interrupted.
Note, therefore, that the called party may reject your OHVA. If this occurs, you
will receive an error tone consisting of a double ring.
If you attempt to place anOHVA call to the wrong type of keyset, or if the
called extension is using the speakerphone, you will hear a fast busy signal
instead of a confirmation tone.
x x x
0