Filter
Top Products
I
Yoursprint 1733cordless telephone
is equipped with a 2.5mm Headset
Jack for use with an optional acces-
sory Headset for hands-free opera-
tion.
If
you choose to use the Headset
option, you must obtain an optional
accessory Headset, which is compat-
ible with the Sprint
1733.
To
purchase a Headset, call
Sprint National Help Desk at
Once you have a compatible 2.5mm
Headset, locate the Headset Jack on
the Sprint 1733 Handset. Connect the
plug on the Headset cord to the jack on
the cordless Handset. The plug should
fit securely. Do not force the connec-
tion.
OPERATION
NOTE:
Whenever a compatible
Headset is connected to the cordless
Handset, the microphone on the Hand-
set will be muted. This is done to limit
the effect of background noise.
The following operational charac-
teristics apply to Sprint Headsets. The
same may also apply to other,
non-
Sprint supplied headsets, but Sprint
assumes no responsibility for their
performance.
The Sprint brand compatible Head-
set has a reversible, monaural design.
You can wear your Headset on either
ear, leaving one ear free for room con-
versation.
The headband can be adjusted to fit
the contour of your head. Using both
hands, slide the headband up or down
so that it rests comfortably on your
head, with the speaker cushion
centered against your ear.
For maximum sound quality, the flex-
ible microphone should be positioned
at the corner of your mouth, about one
inch from your face.
BELT CLIP
The Sprint 1733 is also equipped
with a detachable belt clip. Align the
pins on the inside edge of the clip with
the notches on the sides of the Sprint
1733 Handset. The belt clip should
snap securely into place. Do not force
the connection.