Filter
Top Products
FROM THE BASE
Press
SPEAKERPHONE,
then
VOLUME CONTROL
wait for dial tone. Dial the desired
phone number.
FROM THE HANDSET
The phone must be
ON.
To end your call, press
SPEAKERPHONE
again.
ANSWERING CALLS
FROM THE HANDSET:
Press any key except
OFF,
Volume, INTERCOM
keys and
3
PPU keys.
Press
OFF
to end your call.
FROM THE BASE:
Press
SPEAKERPHONE.
To end
your call, press
SPEAKERPHONE
again.
TEMPORARY TONE
If 'your local telephone service
requires rotary
(PULSE)
dialing,
you can temporarily switch to
TONE
dialing for such purposes
as accessing answering ma-
Located on the side of the Hand-
set, press the
VOLUME UP
or
VOLUME DOWN
keys to raise or
lower the earpiece volume. There
are
8
volume levels.
FROM THE BASE
The Base Unit has its own volume
control. The
VOL
Up and Doh
keys are located directly above
the
SPEAKERPHONE
key.
RINGER CONTROL
FROM THE HANDSET
With the Handset in the idle
(off)
mode:
Press
MENU
chines, bank-by-phone services,
and using calling cards.
To- switch from rotary to tone
dialing during
a
call, press the
*TONE
key. When you end your
call by pressing
OFF
or returning
the handset to the base unit, the
phone will return to the rotary
(PULSE)
mode.
Using the
A/
soft keys,
scroll until
3.
Ringer ToneNol
is
highlighted
Press
ENTER