Filter
Top Products
USING
THE
WALL
MOUNT
ADAPTOR
1.
Position the wall mount bracket
on the Base Unit.
Line up the tabs on the wall
mount adaptor with the holes on
the bottom of the Base Unit
.
Snap
the wall mount bracket firmly in
place.
1
4.
Connect the telephone line cord.
The telephone line cord has a
snap-in plug at each end, Insert
one of the plugs into the jack qn
the bottom of the Base Unit. Insert
the other end of the plug into the
wall jack.
2.
Mount the Base Unit on the wall.
Position the Base Unit so the
mounting studs will fit into the
holes on the bottom of the Base
Unit. Position the power cord to
extend down the wall the phone
is to be mounted on. Slide the
Base Unit down on the mounting
studs until it locks into place.
3.
Plug in the
AC
adaptor.
Plug the
AC
adaptor into an
electrical outlet, and the
DC
connector to the back of the Base
Unit. If the Handset battery pack
has not been charged
previously,
place
the Handset
in
the Base Unit cradle, and allow it
to
charge
for
16
hours.