Filter
Top Products
58
Inter-Tel
®
Model 8664/8665/8668 User Guide
MOVING ON
Phone Options
Noise Mode
Provides options that describe the noise level in your environment. Selecting the cor-
rect option will adjust the endpoint to account for background noise. Select Normal
for most office environments; High for moderate background noise; or Severe for
extremely noisy conditions. Use of the non-Normal modes is not recommended unless
you are in a loud environment or you may find it difficult to be heard on your end-
point.
Key Tones
Determine if tones play when keys are pressed. Key tones are enabled by default.
Turn key tones on or off.
Warning Tones:
Play to alert user to various conditions, such as system up or down, out of range, etc.
These tones are enabled by default. Turn warning tones on or off.
Display Contrast
Adjusts the display for different lighting situations. Set contrast by pressing the Up
and Down side buttons until the desired contrast is displayed and then pressing the
OK softkey.
Keypad Autolock
Locks the keypad automatically when in standby mode. The automatic locking func-
tion of the keypad may be disabled (the default) or adjusted for a delay before lock-
ing. Keypad Autolock options include:
• Disable: the keypad will not lock.
• 5 seconds: the keypad will lock in five seconds
• 10 seconds: the keypad will lock in ten seconds
• 20 seconds: the keypad will lock in 20 seconds
System Info
Phone IP address
Displays the IP address currently assigned to the endpoint. This number may not be
edited.
Gateway IP address or Server IP address
Displays the IP address currently assigned to the Inter-Tel Gateway or the SVP
Server.
Firmware Version
Displays the software version running the endpoint.