Filter
Top Products
38
Inter-Tel
®
Model 8664/8665/8668 User Guide
GETTING STARTED
FORWARDING CALLS
With the Forwarding feature, you can have calls follow you (e.g., forwarded to a cell
phone), or you can redirect calls to a voice mail or other extension.
Manual Call Forwarding
Manual call forwarding allows you to send incoming calls to another extension num-
ber. You can even forward calls to outside numbers, if your endpoint is programmed
to allow this.
To forward calls:
1. While in idle mode, press to bring up the two-line display.
2. Press the Fwd softkey and then press for the following options:
•
ALL: All incoming calls are forwarded without ringing at your endpoint.
•
NO ANSWER: All incoming calls are forwarded if they are not answered
before a timer expires.
NOTE: Only the installer or system administrator can adjust this timer.
•
BUSY: When your endpoint is busy, all incoming calls are forwarded without
ringing at your endpoint.
•
NO ANSWER/BUSY: All incoming calls are forwarded if your endpoint is
busy or if you do not answer, as described above.
3. Press for the following options:
• To forward to an outside telephone number:
– Press the number that corresponds to the
OUTSIDE PHONE option.
– Dial a telephone number or press
for the OUTSIDE DIR option.
(See page 79 for more information on directories.)
• To forward to an extension number: Dial the extension number. OR, press
the number that corresponds to the
IC DIRECTORY option. (See page 79 for
more information on directories.)
• To forward to your voice mailbox: Press the number that corresponds to
the
VOICE MAIL option.
• To forward to your message center: Press the number that corresponds to
the
MESSAGE CENTER option.
To cancel any call forward request:
1. While in idle mode, press to bring up the two-line display.
2. Press until the Fwd softkey is available.
3. Press the Fwd softkey and then press .
4. Press the number that corresponds to the FWD OFF option.
MENU
MENU
MENU
MENU
MENU
FCN
MENU