Filter
Top Products
15
Inter-Tel
®
Model 8664/8665/8668 User Guide
FINDING YOUR WAY
Desktop Charger
Overview
The desktop charger is a one-slot charger that comes in two models. Model 8664 is
designed to charge the 8664 endpoint or the 8668 endpoint. Model 8665 is designed
to charge the 8665 endpoint. The models are not interchangeable.
The desktop charger will only charge the battery pack if the endpoint is in idle mode
or if it is powered off. If you place the endpoint in the charger while it is in active
mode, the battery pack will not charge and the endpoint will continue to deplete the
battery.
The user must end any call in progress by pressing the button on the endpoint
before placing the endpoint into the Desktop Charger. The endpoint may be off or in
idle mode during charging.
Full charging is accomplished in approximately one and a half hours.
Set up the Desktop Charger by first obtaining the appropriate Inter-Tel power supply
for the country or region. Place the Desktop Charger on a flat, horizontal surface. Plug
the power supply into the Desktop Charger and into an appropriate wall outlet.
NOTE: Make sure you are using the charger that is designed specifically for your end-
point. The chargers for the Model 8664, 8665, and 8668 endpoints are different sizes
and you must use the charger that is compatible with your endpoint.
8664 Desktop Charger 8665 Desktop Charger