Filter
Top Products
Caller ID Operation (Cont.)
3. 10 digits without a 1: In some areas of
the country, the area code must be included,
even when dialing a local call. In this
situation, set your GH3060 area code to
another 3 digit "fictitious" area code. (We
recommend using an area code not currently
being used in the U.S., i.e. 100, etc.). Once
your area code is programmed as above,
your GH3060 will show all "10 digits" for
every incoming call. To redial a local 10
digit call, press the handset "CALLS" button
TWICE WITHIN 2 SECONDS in succession.
The "1" prefix is then omitted and the local 10
digit call is redialed.
1.7digitswithouta1:
With current Telecom redialing situations,
there are 4 redial options: (1) 7 digits
without a 1 prefix; (2) 7 digits with a 1
prefix; (3) 10 digits without a 1 prefix; and
(4) 10 digits with a 1 prefix.
Assuming that you
have programmed your correct area code,
redial your local call by pressing the
handset "CALLS" button ONCE.
2.7digitswitha1:If it is necessary to
4. 10 digits with a 1:
Note:
Since the 1 prefix
will be added automatically when dialing a
10 digit number, simply press the handset
"CALLS" button ONCE to make your call.
If your area code requires that you add 1 and
your area code, even if the call is within the
same area code, then you must reprogram
your GH3060 to another 3-digit "fictitious"
area code. The "1" prefix will be added before
the 10 digit number and your long distance call
will be dialed.
Use caution when pressing the handset
"CALLS" button.
Press and release rapidly; if the handset
"CALLS" button is held down too long, the
"VIP CALL" feature will be activated.
#
C
H
R
E
D
IA
L
V
O
L
/R
IN
G
1
2
ABC
3
DEF
0
OPER
C
A
L
L
S
D
E
L
TA
L
K
M
E
M
F
L
A
S
H
7
PQRS
8
TUV
9
W
XYZ
4
GHI
5
JKL
6
M
NO
CALLS
DEL
TALK
MEM
FLASH
1. When the handset display shows the current
time/day, press the " *" or "# " button to
select the Caller ID record you want to erase.
2. Press "DEL" button to erase the call
displayed, the display will show "ERASE?"
on the bottom line.
Caller ID Erase
To Erase a Single Call
4. Press "DEL" button again, the Caller ID
record will be erased and the display will
show the next call message.
Note: If the current displayed message is the
last message to come in, then the display
will show "--END--".
27
26
Insert a 1 prefix before your local call,
assuming that you have programmed your
correct area code, simply press the handset
"CALLS" button TWICE WITHIN 2
SECONDS.
3. Press the "ERASE" button again, all
VIEWED messages will be erased.
Caller ID Operation (Cont.)
To Create a VIP Call:
To Remove a VIP Call:
Note: 1. In this condition, all the Caller ID
records are erased. If there are records
that have not been reviewed, the "Erase All
Calls" function cannot be performed.
2. VIP calls will not be erased when you
erase all calls.
The GH3060 allows you to create VIP call
records. When a VIP call is received, 4
beeps will be heard (after the first ring), to
alert you that this is a VIP call.
1. Press the handset " *" or "# " button to
select the caller ID which you want to assign
a VIP indication.
2. Press and hold the "CALLS" button for 2
seconds until the "VIP" icon is displayed.
Note: Four beeps will also be heard when the
incoming VIP call is a Call Waiting Caller ID
call.
2. Press and hold "CALLS" button for 2
seconds until the "VIP" icon has disppeared.
VIP Calls
1. Press the handset " *" or "# " button to
display the call you have marked "VIP".
To Erase All Calls
1. You must press the " *" or "# " button
to review all of the new Caller ID records
received before you can erase all calls.
2. While the display is in standby mode,
press and hold the "DEL" button for 2
seconds. The display will show "ERASE
ALL?" on the bottom line.
28