Additional Information
63
US
Additional Information
Remedy
• Make sure you set up the base unit correctly (page 8).
• Move the handset closer to the base unit.
• Make sure the telephone line cord is securely
connected to the telephone outlet.
• Make sure the battery is fully charged (page 11).
• Make sure the dialing mode is set correctly (page 10).
• Make sure the last dialed number is really the one you
want to dial.
• The number you last dialed exceeds 32 digits
(including the tone and pause digits if used).
• The number you last dialed is erased.
• Set the RING switch on the handset to ON.
• The battery may be weak. Charge the battery for
more than 12 hours (page 11).
• Make sure you set up the base unit correctly (page 8).
• Move the handset closer to the base unit.
• Move the handset closer to the base unit.
• Place the base unit away from noise sources (page 8).
• It is an out-of-range alarm. Move the handset closer to
the base unit within one minute.
• The battery is weak. Charge the battery for more than
12 hours (page 11).
• Follow the procedure for changing the language
(page 17).
Symptom
You hear five short error
beeps when you press (TALK).
You hear no dial tone.
The phone does not connect at
all, even though the number
you dial is correct.
The phone does not redial
correctly.
You hear five short error beeps
when you try to redial.
The handset does not ring.
You hear interference during
conversation.
You hear a beep every second
during conversation and “OUT
OF RANGE” appear on the
display.
You hear a beep twice per
second and E and “BATTERY
LOW” appear on the display.
An incorrect language is set for
the display and the voice
guidance.
Making calls
Receiving
calls
During conversation
Troubleshooting
If you’ve experienced any of the following difficulties while using your
phone, use this troubleshooting to help you remedy the problem.
Should any problem persist, consult your nearest Sony dealer.
continued
Dsplay and the
voice guidance
language