Filter
Top Products
Answering Machine Features
Answering Machine Features
49
US
Operating from an outside phone
You can call from a touch-tone phone and pick up new messages
recorded on the phone. First, you just set the remote ID code (security
code) and turn on the answering function before going out. Setting the
remote ID code (security code) is only possible on the handset.
Setting the remote ID code (security code)
1 Press (REMOTE) and wait until
the answering machine function
menu appears on the display.
If you hear five short error
beeps and “OUT OF RANGE”
appears on the display, move
closer to the base unit.
2 Turn Jog Dial down to make
“SET SECURITY No” flash,
and then press Jog Dial.
3 Enter the four digits of the
remote ID code (security code)
using the dialing keys.
4 Press Jog Dial.
The remote ID code (security
code) is set, and you hear a long
confirmation beep.
5 Press (OFF).
Note
Do not allow more than 20 seconds to elapse during the operation procedure.
To change the remote ID code (security code)
Enter a new remote ID code (security code). The new code will replace
the old one.
continued
PLAY MAILBOX 1
PLAY MAILBOX 2
SET SECURITY No
Turn Press
(OFF)