Filter
Top Products
19
Sony Personal Entertainment Organizer PEG-UX50/UX40 4-676-072-11 (1)
Setting up your CLIÉ™ handheld
Step 2: Connecting your CLIÉ handheld and
computer via the USB cable
You can synchronize data between your CLIÉ handheld and computer by
connecting them with the supplied USB cable after installing Palm™
Desktop for CLIÉ.
About the USB cable
The supplied USB cable has two connectors. Connect the “A” plug to the USB
port of your computer and the mini “B” plug to the USB connector of your
CLIÉ handheld.
1
Connect the mini “B” plug of the USB cable to the USB
connector of your CLIÉ handheld.
2
Connect the “A” plug of the USB cable to the USB port of
your computer.
Note
Be sure to connect the USB cable directly to a USB port of your computer. If
the USB cable is connected to a computer via another device, such as a USB
hub, the HotSync
®
operation may not work properly.
“A” plug mini “B” plug
Open the USB connector cover
To the USB port of
your computer
01US01COV.book Page 19 Friday, July 11, 2003 1:15 PM