Sony IT-M804 Cordless Telephone User Manual


 
64
US
Intercom Operation
Talking between the phones (Intercom)
(continued)
Notes
An intercom call is available between two phones only. If the other phone are
busy with intercom, page, or all page, you will hear a busy tone and “BUSY”
will be displayed.
If the other phone is in Do Not Disturb mode, you will hear a short busy tone
and “DO NOT DISTURB” will be displayed.
While conversing with an outside caller via the phone receiving an intercom
call, you cannot make an intercom call. If you press (INTERCOM), you will
hear a busy tone.
If you enter your station number mistakenly in step 3, you will hear five short
error beeps. If you enter a station number which has not been assigned, “NO
ANSWER” will be displayed.
Tips
When you receive an intercom call, the phone will ring at a low level even
when the “RING VOLUME” is set to “OFF”.
While on an intercom call, the INTERCOM lamp on the connected two
phones lights up and on other phones flashes.
If you press (INTERCOM) in step 2 without performing step 1 on page 63, the
speakerphone will automatically turn on. When you’re done talking, press
(SPEAKERPHONE) in this case.
If you pick up the handset during speakerphone conversation, it will change
to handset conversation, and conversely when you press (SPEAKERPHONE)
during handset conversation, it becomes speakerphone conversation.