Sony IT-M804 Cordless Telephone User Manual


 
Caller ID Features
56
US
Using the Caller ID list (continued)
Storing a number of the Caller ID list into
one-touch dial buttons
1 Display the phone number you
want to store by turning Jog
Dial.
2 Press (PROGRAM) while the
number is displayed.
3 Press Jog Button.
When you store the phone
number in the second memory
of a one-touch dial button, press
(LOWER).
4 Press one of the one-touch dial
buttons.
You will hear a long
confirmation beep and the
phone stores the number.
Notes
If the home area code has not been entered, you will hear five short error
beeps and the storing will be canceled in step 2.
Do not allow more than 20 seconds to elapse between steps 2 to 4 of the
procedure.
If the number displayed in step 1 is not the one you should store, you can
change the number of digits of the phone number as described on page 58.
However, once you store a number into one-touch dial button, you cannot
alter the phone number as described on page 58.
SMITH JOHN
COPY SAVE
(LOWER)
Jog Button
DIRECTORY