Filter
Top Products
Intercom Operation
39
US
Intercom Operation
Voice paging (PAGE)
You can page the other phone connected to the LINE 1 jack without
any operation on the other phone. The phone being called rings once
and the speakerphone automatically turns on.
Example: Page from station
number 02 to 03.
1 Pick up the handset.
2 Press (PAGE).
“PAGE ??” appears on the
display.
3 Enter the two digits station
number (01 to 16) by pressing
the dialing keys.
The phone pages immediately
after the number is entered.
“PAGE TO 03” appears on the
display of the phone making a
call.
The phone rings and “PAGE
FROM 02” appears on the
display of the phone receiving a
call.
You can begin talking.
4 When you’re done talking,
replace the handset in the
cradle.
Notes
• Paging is available between two phones only. If the other phone are busy
with intercom, page, or all page, you will hear a busy tone and “BUSY” will
be displayed.
• If the other phone is in Do Not Disturb mode, you will hear a short busy tone
and “DO NOT DISTURB” will be displayed.
• While conversing with an outside caller via the phone to be paged, you
cannot page that phone. If you press (PAGE), you will hear a busy tone.
• If you enter your station number mistakenly in step 3, you will hear five
short error beeps. If you enter a station number which has not been assigned,
“NO ANSWER” will be displayed.
Tips
• If you press (PAGE) in step 2 without performing step 1, the speakerphone
will automatically turn on. To disconnect the speakerphone conversation,
press (SPEAKERPHONE).
• A person can also answer a page by picking up the handset in step 3.
(SPEAKERPHONE)