Sony IT-M704 Telephone User Manual


 
Getting Started
15
US
Getting Started
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing
mode (tone or pulse).
When other phones (IT-M704 or IT-M804) are connected to the LINE 1
jack, the same dialing mode is automatically set to all the phones. Be
sure to connect the phones beforehand, and set the dialing mode.
1 Press (PROGRAM).
2 Press b(*) or (#)B until
“DIAL MODE” appears on the
display.
3 Press (PROGRAM).
4 Press b(*) or (#)B to choose
the dialing mode (“TONE” or
“PULSE”), and then press
(PROGRAM).
You will hear a long
confirmation beep.
Notes
Do not allow more than 20 seconds to elapse between each step of the
procedure.
The dialing mode cannot be set for every line.
If you aren’t sure of your dialing system
Make a trial call with the dialing mode set to “TONE”.
If the call connects, leave the setting as is; otherwise, set to “PULSE”.
TONE PULSE
continued