Filter
Top Products
5.
Insert the two new batteries on top of the ribbon tab, taking
care to position them correctly according to the plus (+)
and minus
(-)
terminals, as shown below.
6.
Replace the cover.
7.
Set the battery replacement switch to NORMAL
OPERATION.
If nothing happens when you press [ON]:
*
Setting the battery replacement switch to REPLACE
BATTERIES shuts off power to the unit. Check that the
battery replacement switch is set to NORMAL
OPERATION.
*
Repeat the above battery replacement procedure step by
step.
*
After following the above battery replacement procedure,
the LCD contrast setting which is set by user will be back
to its default mode.
91