Sanyo CLT-U12 Cordless Telephone User Manual


 
5
Modular jack
You need an RJ11 type modular phone jack. If you do not have a modular jack, call
your local phone company to find out how to get one installed.
Checking package contents
Make sure your package includes the items shown here.
GETTING STARTED
Installation tips
Some cordless telephones operate at frequencies that may cause interference
to nearby TVs, microwave ovens, and VCRs. To minimize or prevent such
interference, the base of the cordless telephone should not be placed near or on
top of a TV, microwave oven, or VCR. If such interference continues, move the
cordless telephone farther away from these appliances.
Certain other communications devices may also use the 2.4 GHz frequency for
communication and if not set properly these devices may interfere with each
other and/or your new telephone. If you are concerned with interference, please
refer to the owner’s manual for these devices on how to properly set channels
to avoid interference. Typical devices that may use the 2.4 GHz frequency for
communication include wireless audio/video senders, wireless computer
networks, multi-handset cordless telephone systems, and some long-range
cordless telephone systems.
Base unit
Charger
(For CLT-U12,
CLT-U22 &
CLT-U32)
2 X Handsets
(CLT-U20 &
CLT-U30 with
one handset)
2 X Batteries
(CLT-U20 &
U30 with one
battery)
Battery
order sheet
2 X Belt clips
(CLT-U20 &
CLT-U30 with
one belt clip)
2 X AC Adaptors
(CLT-U20 & CLT-
U30 with one
adaptor)
KU28-9-250D
Wall mount
bracket
Telephone
line cord