Filter
Top Products
24
LCD SCREEN MESSAGES
The following indicators show the status of a message or of the phone.
BLOCKED NUMBER/
NAME/CALLER
TRANSFERRING..
EMPTY
ERROR
ENTER NAME
ENTER TEL NUMBR
DELETE ALL?
DELETE?
END OF LIST
HANDSET 1
HANDSET 2
INCOMPLETE DATA
MESSAGE WAITING
NEW CALL
NO CALLS
NO DATA
REPT
UNKNOWN NUMBER/
NAME/CALLER
PAGING
RINGER=OFF
The person is calling from a number that has been
blocked from transmission.
A call transfer from one handset to another handset
(For CLT-U12, CLT-U22, and CLT-U32).
There is no record stored to the selected directory
location.
Caller information has been interrupted during transmis-
sion or the phone is excessively noisy.
Prompt telling you to enter name in directory.
Prompt to enter the telephone number for directory.
Prompt asking you if you want to erase all Caller ID
information.
Prompt asking you if you want to erase the current
Caller ID entry or a directory entry that is shown on
screen.
Indicates that there is no additional information in Caller
ID list.
This handset is handset 1 (For CLT-U12, CLT-U22, and
CLT-U32).
This handset is handset 2 (For CLT-U12, CLT-U22, and
CLT-U32).
The telephone provider did not send all Caller ID
information because the signal was weak or the call
was interrupted.
Caller has left a message (you must subscribe to voice
mail service offered by your local phone company for
this to work).
Indicates call or calls have not been reviewed.
There are no Caller ID records stored to memory.
No Caller ID information was received.
Repeat call.
The incoming call is from an area not serviced by Caller
ID, or the information was not sent.
Someone has pressed the PAGE key on the base.
Ringer ON/OFF switch on the right side is set to OFF.