Filter
Top Products
SMT-i5243 User Guide _33
Call Transfer
A current call can be transferred to another extension or station line’s subscriber.
1
To transfer a call, press the [Transfer] button.
2
After hearing a dial tone, press the phone
number of another subscriber to connect.
- If the target number is a station line number, press the
line group directory number (e.g. [9]) and then dial a
phone number; or if it is an extension number, only
dial the extension number.
3
When a ring back tone is heard from the other
subscriber, put down the handset.
- Alternately, wait until the called party receives the call,
and then hang up the phone after telling him/her
about it.
The following events may occur when a call is transferred to another subscriber
(counterpart):
- When the receiving caller is busy or does not receive the call: Press the [Transfer]
button again to go back to the conversation with the original caller.
- When the receiving caller does not answer the phone after call transfer is
completed: A call is dialed back to the caller who originally transferred it.
- When the receiving caller’s line is busy: It is possible to resume conversation with
the original caller, or make give the call a waiting status to wait for the receiver to
finish their call.