Filter
Top Products
Phone Basics 24
Phone Basics
To permanently block your number, call the Customer Service
department of your network service provider.
Note
: If you have not subscribed to Caller ID, and the back light is set to
turn off after a period of time, pressing will switch the back light
back on. Either press and hold or press twice to answer the
second call when the LCD is turned off. To avoid this problem, set the
back light to "flip open". For more information, see "Changing the
Backlight Time Length" on page 128.
Responding to Call Waiting
When you’re on a call, Call Waiting alerts you of incoming calls by
sounding two beeps. Your phone’s screen informs you that another
call is coming in and displays the caller’s phone number (if it is
available and you are in digital mode).
To respond to an incoming call while you’re on a call:
• Press . (This puts the first caller on hold and answers the
second call.)
To switch back to the first caller:
• Press again.
Tip
: For those calls where you don’t want to be interrupted, you can
temporarily disable Call Waiting by pressing
before placing your call. Call Waiting is automatically reactivated
once you end the call.
A920 BMC Guide.book Page 24 Friday, December 9, 2005 12:20 PM