Filter
Top Products
3.5.2 RING
The output voltage and frequency of the ring signals in the OfficeServ 7100 are as follows:
• Output voltage: 75 Vrms Square Wave (4SLM)
• Frequency: 20 or 25 Hz
The OfficeServ 7100 provides the users with various tones to notify the users of the status of functional opera-
tions.T
he ON/OFF
cycles of curr
ently specified tones are shown in the table below.
Note:The ON/OFF cycle can be adjusted by changing the values of the system database.
*Overrides headset mode.
3.3
3.5.3 SYSTEM TONES
TONE ON/OFF CYCLE
DIAL TONE 1000/250 ms
BUSY TONE 500/500 ms
DO NOT DISTURB TONE 250/250 ms
RING BACK TONE 1000/2000 ms
CALL PARK TONE CONTINUOUS
CONFIRMATION/CAUTION/BARGE-IN TONE 50/50 ms
CALL BACK/HOLD TONE 500/3500 ms
RING BACK TONE 1000/2000 ms
ERROR/NUMBER UNOBTAINABLE TONE 250/250 ms
MESSAGE CAMP ON TONE CONTINUOUS
3.6 KEYSET LED INDICATIONS
CONDITION LED COLOR LED ON LED OFF
LINE IDLE OFF — OFF
LINE IN USE RED / GREEN STEADY —
RECALL AMBER 500 ms 500 ms
CALL ON HOLD RED / GREEN 500 ms 500 ms
RINGING C.O. CALL GREEN 100 ms 100 ms
RINGING INTERNAL CALL GREEN 100 ms 100 ms
DND INDICATION RED 112 IPM for 500 ms 500 ms
OPERATOR CALLS RED 100 ms 100 ms
ANS / RLS (DND)* RED 112 IPM for 500 ms 500 ms
ANS / RLS (HANDSET MODE)** RED STEADY —
Home Page
Table of Contents