Filter
Top Products
1716
Time and Date
Time and date are displayed on the idle screen. By default the date and time of the
phone are congured manually, but you can set to obtain them from a precong-
ured SNTP server, if needed. Please contact your system administrator if the time
or date is incorrect.
To change Time and Date via the Phone interface:
Press MENU [3. SETTINGS[1. BASIC[1. TIME & DATE[OK.
If SNTP is chosen, the phone will automatically get the time from an NTP Server.
Use the UP and DOWN navigation keys to select the specic options and change
parameters to meet your needs. You can set Time Zone, NTP Server respectively.
If Manual is chosen, the time can be set manually. Use the UP and DOWN naviga-
tion keys to select the option and enter the specic date and time.
Press the OK button to save your changes. Or press MENU/BACK key to return to
the previous screen.
To set time format via the Phone interface:
Press MENU/BACK[3.Settings [1.BASIC [1.TIME & DATE [3.TIME & DATE
[OK.
Use the LEFT and RIGHT navigation keys to choose a preferred time format: 12
hour or 24 hour.
Press the OK button to save the changes and return to the previous screen.
Note: By default date and time setting is set to “Manual”.
Reboot
You should reboot the phone when you are asked to, e.g. after applying specic
changes to phone conguration.
To reboot via Web interface:
1) Go to SYSTEM[UPGRADE.
2) Click REBOOT button.
Note: Please do not power o during reboot, or it may cause a ash memory error.
Customizing Your Phone
General Settings
Phone Status
You can view the status of your phone using the phone interface or the web interface.
This option allows you to review:
- IP address
- MAC (Machine Access Control) address
-Firmware version
-Network: MAC, LAN, Netmask, Gateway, DNS, etc
-Phone: Model, Hardware, Firmware, Product ID and MAC
-Accounts: The status of the two SIP accounts
To check the Phone Status via phone interface:
Press OK button to check the IP. Use the navigation keys to check the other information.
To view the Phone Status via web interface:
Open a web browser and input the IP Address of the phone. Enter login and
password (default login and password are admin and admin).
Select STATUS [HARDWARE STATUS.
1. DATE (M-D-Y):
01-01-12