Filter
Top Products
3534
You can only congure these settings via Web interface:
1) Go to ACCOUNT [ ACCOUNT SETTINGS.
2) Select desired account.
3) Make desired selections in Advanced section.
Check with your system administrator or service provider for more information.
Network Settings
Please refer to chapter “Conguration and Registration” for the Basic Network
WAN setting information. In the next paragraphs we will describe other Network
related settings.
Advanced Network Settings
VLAN
VLAN is a group of hosts with a common set of requirements that communicate
as if they were attached to the Broadcast domain, regardless of their physical
location.
The IP110 supports 802.1p and q packet tagging. VLAN ID and Priority can be set
via phone or web interface.
To congure VLAN settings via Phone interface:
1) Make sure the active User Type is admin or var
2) Press MENU/BACK[3. SETTINGS[2. ADVANCED.
3) Enter the password required, scroll to Network option, press OK button and
select VLAN, then press OK to enter.
4) Choose WAN Port and press OK button to enter.
5) Use the LEFT or RIGHT navigation keys to choose and set the VLAN Status; input
the VID Number, Priority.
6) Press OK button to save the settings, or MENU/BACK to return to VLAN menu.
To congure VLAN settings via Web interface:
Choose NETWORK[ADVANCED. Perform necessary changes. Check with your
system administrator for more information.
To listen to your new messages via the Phone interface:
1) Press the VOICEMAIL button directly.
2) You may be prompted to enter the password which is needed to connect to your
VoIP telephony system.
3) Your voice mailbox is connected and you are able to listen to your new and old
voicemails.
Note: Before retrieving a new VOICEMAIL, please make sure that the connect-
ing code has been set on the phone. If you have more than one account set on the
phone, when pressing the VOICEMAIL button you will be calling the active account
mailbox.
Advanced Functions
Account Setting
Please refer to “Conguration and Registration” chapter for the basic account
setting information. The following table lists the parameters in Advanced Account
Setting section of the web interface.
Field Name Description
Local SIP Port Local SIP port. The default value is 5060.
DTMF Type Select DTMF type.
Session Timer This toggles the Session Timer on or o.
Session Initiation Protocol (SIP). This extension allows for a periodic refresh
of SIP sessions through a re-INVITE or
UPDATE request. The refresh allows both
user agents and proxies to determine if
the SIP session is still active.
Voice Encryption (SRTP) Voice Encryption (SRTP)
ptime(ms) The time between two RTP packets of
the current used codec
SIP Server Type The type of SIP Server