Filter
Top Products
32
Table of Contents
Getting Started 5
Packing List 5
Assembling IP110 6
Conguration and Registration 7
Basic Conguration via Web Page 7
Account Settings 8
Basic Conguration using phone keypad 9
Overview 11
LEDs 12
Icons 12
User Interface 13
User levels 15
Administrator Mode 15
Reboot 16
Customizing Your Phone 16
General Settings 16
Phone Status 16
Time and Date 17
Keypad Lock 18
Audio Settings 18
Volume 18
Ring Tones 19
Codec Selection 19
Contact Management 20
Edit/Add/Delete Contacts 20
Basic Call Functions 23
Outgoing calls 23
Call Devices 23
Call Methods 23
Send Key conguration 24
Hot Line 24
Anonymous call 25
Dial Plan 26
Incoming calls 27
DND 28
Call Forward 28
Auto Answer 29
Call log 30
Accessing Call log 30
Accessing Missed Calls list 30
Accessing Dial Calls list 30
Call list items management 30
During an Active Call 31
Mute 31
Call Hold 31
Call Waiting 31
Handling a waiting call 31
Call Waiting Conguration 32
Call Transfer 32
3-way Conference 33
Voicemail 33
Voicemail settings 33
Retrieving your Voicemail messages 33
Advanced Functions 34
Account Setting 34
Network Settings 35
Advanced Network Settings 35
VLAN 35
HTTPS 36
802.1X 36
Reset to Factory 36
Firmware Update and Autoprovisioning 37
Decryption 37
System Export 38
Keys conguration 38
Send Key conguration 38
Programmable keys 39
Line keys Conguration 39
Line 40
Speed Dial 40
Confernce 40
Transfer 41
Hold 41
DND 41
Interference Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference; and (2) This device must accept
any interference received, including interference that may cause undesired operation. Privacy of
communications may not be ensured when using this phone.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is
“receiving” the interference).
• Reorient or relocate and increase the separation between the telecommunications equipment
and Receiver.
• Connect the telecommunications equipment into an outlet on a circuit dierent from that to
which the receiving antenna is connected.
If these measures do not eliminate the interference, please consult your dealer or an experienced
radio/television technician for additional suggestions. Also, the Federal Communications Commission
has prepared a helpful booklet, “How To Identify and Resolve Radio/TV Interference Problems.” This
boOKlet is available from the U.S. Government Printing Oce, Washington, D.C. 20402. Please specify
stock number 004-000-00345-4 when ordering copies.
Warning: The changes or modications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
The RCA IP110 phone is dedicated to business environment use. It is a full-featured and a exible
SIP solution. It is compatible with most IP PBX and VoIP providers.
Please read through the administrator’s guide before installing your phone.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body. This transmitter must not be co-located or oper-
ated in conjunction with any other antenna or transmitter.”
This is a class B device, in a domestic environment; this product may cause radio interference, in
which case the user may be required to take adequate measures. To avoid the potential eects on
the environment and human health as a result of the presence of hazardous substances in electri-
cal and electronic equipment, end users of electrical and electronic equipment should understand
the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted munici-
pal waste and have to collect such WEEE separately.