Filter
Top Products
2726
Here is a dial plan example:
(111T|[0-4] xxxxxxxxT)
111T This will dial 111 immediately after you entered the third digit.
[0-4]xxxxxxxxT Any 9-digit number starting with 0,1,2,3 or 4 will be dialed out
immediately after you enter the 9th digit.
To create a Dial Plan in the web interface, use the following elds:
-Dial Plan: Enter the dial plan here
-DP Enable: To enable or disable the dial plan
-Dial Plan tmo: Timeout before phone converts the dialed number
according to dial plan (if enabled)
-Dial End tmo: Timeout before phone makes the call after the last digit
of the number is entered
-Dial End tmo Enable: To enable or disable the Dial End timeout.
-Hook O tmo: Timeout for the unit to go back to standby mode after
the handset is o hook
-Hook O tmo Enable: To enable or disable the Hook O timeout
Incoming calls
Answering an incoming call
1) Lift the handset or press the SPEAKER button to answer using the speaker-
phone, or press the HEADSET button to answer using the headset.
2) If you are already talking on the phone, press the corresponding LINE key or OK
button to answer the new call.
During the conversation, you can alternate between handset, headset and speak-
erphone by pressing the corresponding buttons or picking up the handset.
Rejecting an incoming call
Press the MUTE/CANCEL key to reject an incoming call directly.
To set Anonymous call rejection using phone interface:
1) Press MENU/BACK[2. Features [ 4. Anonym Call to enter the conguration
page.
2) Press the UP or DOWN navigation keys to enter the Rejection page
(if the active user type is admin or var , press MENU/BACK [ 2. FEATURES [ 6.
ANONYM CALL ).
3) Press RIGHT or LEFT navigation keys to enable/disable Anonymous Call Rejection
function.
4) If your user type is admin and you would like to use your service provider to
get this service , please press the DOWN key and enter the Rejection On Code and
Rejection O Code. Whenever you enable/disable the Rejection option on your IP
phone, it will automatically send these codes to the server.
5) Press OK to save your changes, or MENU to cancel.
Note: To manage Anonymous Calls and Rejection codes you need to have admin
or var rights. Check active User Type before attempting to congure using phone
interface.
Dial Plan
A dial plan establishes the expected number and pattern of digits for a telephone
number. This includes country codes, access codes, area codes and all combina-
tions of dialed digits.
Dial plans can be used for least cost routing, dialing convenience or to prevent
users from calling specic numbers or groups of numbers.
Dial plans require admin or var privilege.
The entire dial plan is enclosed in brackets (). Each dial plan is pipe seperated (|).
The dial plan can include the digits 0 to 9, * and #. “x” represents any digit from 0
to 9. Repetition (i.e. x.) represents any digit (x) repeated 0 or more times. Big letter
T means to dial the numbers immediately after the dial plan sequence is matched
(e.g. 1234T). Square brackets [] are for digit matching. For example, [578] xxx will
match any four digit sequence starting with either 5, 7 or 8. [5-8]xxx will match
any four digit sequence starting with 5, 6, 7 or 8.