Filter
Top Products
4342
Call Park
Call Park is a feature that allows a person to put a call on hold at one telephone
set and continue the conversation from any other telephone set. Your server needs
to support this feature. Please check with your service provider or IP PBX vendor
for more details.
The “call park” feature is activated by pressing a preprogrammed button or a spe-
cial sequence of buttons.
To assign the key as Call Park via web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Voice Mail
When the key is congured as a voicemail key you can access voicemail quickly by
pressing this key.
To assign the key to Voice Mail via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Prex
When you press a key in which prex function has been set up, the phone will
automatically dial the prex and you will only have to dial the rest of your cor-
respondent number to call him out. Prex can only be assigned to the line keys.
To assign the key as Prex via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Redial
If a key is congured as Redial key:
• If you press this key in idle status, it will enter the Dialed Calls
interface
• If you press this key in o hoOK mode, last dialed number will be
sent directly
• If you press this key when there is an active call, it will be put on
hold and a new call sent to the last dialed number
To assign Redial to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Trouble shooting
I cannot register to the server
Check the IP address (press OK key for status).
Check your gateway.
Check your DNS server.
Make sure your account information is the same as you got from your service pro-
vider.
Check whether the SIP server is on.
Check the SIP register port, the default value is 5060.
I can’t get an IP address
Make sure you have plugged the Ethernet cable into the WAN port.
Make sure there is an available DHCP server on, and there are available IP addresses
in the server.
Try to set your WAN port to static IP client mode.
During a call, I cannot hear any voice
Make sure your handset is tightly connected with the phone.
Check whether you have muted the conversation or not.
Consult the outbound server details with your service provider.
I have problems sending DTMF digits during calls
Check which kind of DTMF you are using, and whether it is compatible with the server.
Consult the payload value with your service provider.
Time and date are not correct
Select the right time zone or enter the time information manually on the phone.
Check your DST settings.
How do I answer incoming calls during a call?
If a call comes in when you are in a conversation, press OK key to answer the incom-
ing call.