Filter
Top Products
10
7. Set the T/P switch to T if you have
touch-tone service or to P (pulse) if
you have rotary dial service.
8. Set the RING switch to ON so the
handset rings for incoming calls.
9. Plug the power supply adapter into an
AC outlet and raise the antenna.
10.Place the handset in the base to
charge for 12 hours. The CHARGE/
PAGE light comes on. If you don’t
charge the handset battery properly
(for 12 hours) when you first set up
the phone, the battery’s long-term
performance will be compromised.
PAG E
LINE 1
LINE 2
CHARGE
PAG E
9
10
CAUTION: Use only the Thomson power supply 5-2445(white)/5-2446(black)that is
compatible with this unit. Using other adapters may damage the unit.