Filter
Top Products
Memory Log and Phone Book (Directory) Memory
You may store data in the Phone Book Directory or an MEMORY LOG (16 buttons located to
the right of the number pad on the base). The Phone Book and each MEMORY LOG stores
up to 21 characters and 32 digits.
Storing a Number and Name in Memory
NOTE: To cancel the storing procedure at any time, press EXIT.
1. Press the Store softkey. ENTER NUMBER is displayed.
2. Use the touch tone pad on your telephone to enter the telephone number you want to
store. The numbers you enter show in the display.
3. Press Save softkey. ENTER NAME is displayed.
4. Use the touch-tone pad to enter a name (up to 21 characters). More than one letter is
stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice
for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the
letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a
6 key once for the letter M; press the 4 key 3 times for the letter I; press the 8 key for
the letter T; press the 4 key twice for the letter H.
5. Press Save softkey. SELECT LOCATION is displayed.
6. Enter memory location:
Press the DIR button to save the record in the Phone Book memory,
OR
Press an MEMORY LOG button (1-16) to save the record in that memory location.
NOTE: If there is a record stored in selected memory location “OVERWRITE?” shows in the
location.
7. Repeat steps 1-6 for any additional names and numbers you want to store, in phone
book memory.
NOTE: The storage procedure automatically cancels after 30 seconds if no keys are pressed.
50
NOTE: If you make a mistake, use the DIR or CID buttons (left/right) to move the cursor to
the incorrect digit, and press the DELETE softkey to delete.