RCA 25210 Conference Phone User Manual


 
37
“Out of Range...” is displayed on the screen
Move the handset closer to the base.
Make sure the base power cord is connected to a working electrical
outlet.
Date/Time setting is restored to default setting
May be caused by power failure. Set Date/Time again.
Caller ID Solutions
No Display
Charge the battery (for 14 hours). Or replace the battery.
Make sure the unit is connected to a non-switched electrical outlet.
Disconnect the power adaptor from the base and reconnect it.
No Caller ID
You must be subscribed to the standard Name/Number Caller ID service
from your local telephone company to receive CID information.
Battery
If you experience any of the following problems, even after recharging the
battery, you may need to replace the battery pack:
Short talk time
Poor sound quality
Limited range
Troubleshooting Guide