Filter
Top Products
20
Making Calls in the Speakerphone mode (from the base)
1. Press the Speaker button (in base), the unit will pick the available line
for you. If both lines are available, Line 1 will be used first.
-OR-
Press
Line 1 or Line 2 button on the base to select the line, and the
base’s speaker will activate.
2. Wait for a dial tone then dial a phone number.
3. Press the
Speaker button when finished.
NOTE: After pick the line, the call timer starts to run until all the calls are
hung up. The timer serves for both 2 lines.
Making Call in the Speakerphone mode (from the handset)
1. Press the Speaker button to activate the speakerphone on the first
available line.
-OR-
Press the LINE 1 or LINE 2 soft key to select a specific line. The handset
will activate the ear piece.
2. Press the
Speaker button to switch to speakerphone mode.
3. Wait for a dial tone then dial the phone number.
4. Press the
End button when finished.
Making Calls with the Optional Headset
1. Plug the headset into the Headset jack on the side of the base or side of
the cordless handset.
2. Adjust the headset to rest comfortably on top of your head or over
your ear.
3. Move the microphone to approximately 2 to 3 inches from your mouth.
4. For the base, press the
Headset button on base and the phone auto-
matically selects first available, if both lines are available, Line 1 will be
used.
5. For the cordless handset, press the
Talk button.
6. Wait for a dial tone, and then dial the phone number.
7. Press
Headset button (on base) or End button (on handset) when fin-
ished.
CAUTION: Use only Thomson Inc. 5-2425 headset that is
compatible with this unit.
NOTE: If the headset is not connected (or if not completely inserted into
headset jack), an error tone is heard when the Headset button is pressed.
Telephone Operation