Filter
Top Products
33
Programming the Voice mail numbers
1. Make sure your phone is
OFF (not in talk mode).
2. Press STORE soft key on base. The screen displays “SELECT BUTTON
LOCATION”.
3. Press one of the two
Voice mail buttons.
4. If the location is empty, the screen displays “ENTER NUMBER:”
-OR-
If the location is not empty, the screen displays the existing contents.
5. If the location is empty, enter the phone number.
-OR-
If the location is not empty, press the “REPLACE” soft key to confirm,
and then enter the phone number.
6. Press the SAVE soft key to save the number.
7. The screen displays “VOICE MAIL X” and the number for 5 seconds and
then returns to the idle mode.
Note:
- User can press the
Delete button to delete the current digit and move
the curser to the left one position.
- Press the Left (
3) and Right (4) arrows to move the curser left and
right to edit input.
- Press PAUSE twice (displayed as “P”) to enter a pause in the dialing
sequence.
- If the user does not enter anything and then presses SAVE, the contents
will be cleared.
Voice Mail System