Filter
Top Products
8
Connections & Set Up
Set Up
1. When the unit is in READY mode, press the
MENU/OK button to display the program set
up menu.
2. Press the or button to scroll through the
set up menu selections. They are as follows:
RINGER VOLUME (off, low, middle, high) The
default setting is middle.
RINGER TYPE (1 / 2 / 3 / 4) The default
setting is type 1.
HOLD REMINDER TIME (Off / 15 / 30 / 45 /
60 sec) The default setting is 30 sec.
FLASH TIME Programming (100 / 200 / 300 /
400 / 500 / 600 / 700 / 800 / 900msec) The
default setting is 600msec.
LCD CONTRAST ADJUSTMENT (1 / 2 / 3 / 4 /
5) The default setting is 3.
RESET
3. Press the FLASH/EDIT button. The current
setting shows in the display.
4. Press the or to scroll through the menu
selections then press MENU/OK to accept the
setting and return to the setup menu.
Ringer Volume
There are four ringer volume levels (OFF, LOW,
MIDDLE, HIGH), and the default level is middle.
1. In standby mode, press the MENU/OK button
to go to program setup.
2. Press or to control the pointer to point
to RINGER VOLUME, then press FLASH/EDIT
to select.
3. Press the button to increase the ringer
volume, or press the button to decrease
ringer volume. The volume level on the
display changes accordingly and the
corresponding ring tone is generated.
4. Press MENU/OK button to save the selected
ringer type . You will hear a long beep and
the display shows SAVED, then returns to the
previous menu.
RINGER VOLUME
RINGER TYPE
RINGER VOLUME
MIDDLE