Filter
Top Products
21
Deleting an Entry
1. Press
DIRECTORY
.
2. Press or to display the number
you want to delete.
3. Press
DELETE
. The display shows
Delete? DELETE=OK prompting
you to confirm the deletion.
4. If this is the entry you want to delete,
press
DELETE
again. The TAD
beeps indicating that the entry was
deleted from the directory.
Entering a Pause
In some telephone systems, you must
dial an access code (9, for example) and
wait for a second dial tone before you
can dial an outside number. You can
store the access code with the phone
number. However, you should also store
a pause after the access code to allow
the outside line time to connect. To en-
ter a 2-second pause, press
EDIT/REDI-
AL
on the handset at each point where a
pause is needed. The display shows .
For a longer pause, press
EDIT/REDIAL
additional times.
Testing Stored Emergency
Numbers
If you store an emergency service's
number (police department, fire depart-
ment, ambulance) and you choose to
test the stored number, make the test
call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.
USING A HEADSET
You can make or answer calls with
hands-free convenience using an op-
tional headset that has a
3
/
32
-inch (2.5
mm) plug. Contact your local Ra-
dioShack store for a suitable headset.
Insert the headset plug into the jack
on the side of the handset.
Notes:
• Connecting a headset disconnects
the handset's earpiece and micro-
phone.
•
VOLUME
or on the handset
also controls the headset's volume.
43-728.fm Page 21 Thursday, August 26, 1999 8:53 AM