Filter
Top Products
15
Setting the Handset's
Ringer Volume
Be sure
RINGER OFF/ON
located on the
side of the handset is set to
ON
.
1. At any time except during a call, lift
the handset and press
FLASH/
MENU
. Ringer Vol.: High
appears.
Note:
You cannot set the handset’s
ringer volume if you press
TALK
when you lift the handset.
2. To change the ringer volume to low,
press
VOLUME
. The display
shows
Ringer Vol.: Low. Each
time you press , the ringer volume
alternately changes between
High
and Low, and the handset rings at
the selected volume.
3. To clear the display when you finish,
press
FLASH/MENU
or return the
handset to the base.
USING AUTO TALK
Your phone is preset so you must press
TALK
to answer a call. With auto talk
turned on, you can answer a call by just
lifting the handset from the base, or, if
the handset is away from the base, by
pressing any key.
Follow these steps to turn auto talk on or
off.
1. Lift the handset and press
FLASH/
MENU
. First the menu of Ringer
Vol.
appears.
2. Repeatedly press until
Auto
Talk:
Off appears.
3. Press to select
Auto Talk:
On
. Auto Talk alternates between
On and Off.
4. To clear the display when you finish,
press
FLASH/MENU
or return the
handset to the base.
SETTING CALLER ID/
CALL WAITING ON/OFF
OPTIONS
If you have Call Waiting with Caller ID
service, you can set the TAD-728 to
show Caller ID information for an incom-
ing call even while you are already on
the phone.
Follow these steps to select the Caller
ID/Call Waiting feature on, off or options.
For the Call Waiting Options service,
see “Call Waiting Options” on Page 28.
1. Lift the handset and press
FLASH/
MENU
. The menu Ringer Vol.
appears.
2. Repeatedly press until
Call
WTG:
Options appears.
43-728.fm Page 15 Thursday, August 26, 1999 8:53 AM