Filter
Top Products
19
Paging from the
Base to the Handset
To send a page from the base to the
handset, press
INTERCOM
on the base.
The handset beeps twice per second for
15 seconds. The handset's display
shows
Paging. The base’s IN USE/
CHARGE indicator flashes.
To answer a page at the handset, press
INTERCOM
. Begin your conversation af-
ter the handset display shows
Inter-
com
.
To end an intercom call, press
INTER-
COM
on the base or handset. All indica-
tors turn off.
Paging from the
Handset to the Base
To send a page from the handset to the
base, press
INTERCOM
on the handset.
The base sounds two short beeps, and
automatically answers the handset's
page (whether or not anyone is there).
Begin your conversation.
To end an intercom call, press
INTER-
COM
on the base or handset. All indica-
tors turn off.
USING THE DIRECTORY
The TAD-728’s directory stores up to 30
telephone numbers with a maximum of
16 digits for each number (including
pauses) into its memory. You can attach
a name (up to 16 characters) to stored
phone numbers.
Storing a Name and Number
Notes:
• An error tone sounds and the phone
exits the storing process if you wait
more than 30 seconds between
each key press.
• If you receive a call during memory
entry, the phone exits the storing
process.
1. Lift the handset.
2. Hold down
DIRECTORY
on the hand-
set until
Enter name appears.
If you do not want to enter a name,
skip to Step 4.
43-728.fm Page 19 Thursday, August 26, 1999 8:53 AM