Filter
Top Products
14
• The supplied battery pack should
last for about a year. When it loses
its ability to fully recharge, order a
replacement battery pack from your
local RadioShack store (see
“Replacing the Battery Pack” on
Page 42).
SETTING THE
DIALING MODE
Set
PULSE/TONE
on the back of the
base for the type of service you have. If
you are not sure which type you have,
once the battery pack is fully charged,
do this test.
1. Be sure
PULSE/TONE
is set to
TONE
.
2. Lift the handset, press
TALK
, and
listen for a dial tone.
3. Press any number other than 0.
Note:
If your phone system requires that
you dial an access code (9, for example)
before you dial an outside number, do
not dial the access code either.
If the dial tone stops, you have touch-
tone service. Leave
PULSE/TONE
set to
TONE
.
If the dial tone continues, you have
pulse service. Set
PULSE/TONE
to
PULSE
.
SETTING THE RINGERS
Turning the Ringers On or Off
You can turn the ringers on the base or
handset on or off.
Use
RINGER
OFF/ON
on the base to turn
the ringer on the base on or off.
Use
RINGER OFF/ON
on the handset's
left side to turn the handset’s ringer on
or off.
Notes:
• The handset does not ring when it is
on the base, even when
RINGER
OFF/ON
is set to
ON
.
• If you turn off the ringer, you can still
make calls (and answer calls if you
hear another phone on the same
line ringing).
43-728.fm Page 14 Thursday, August 26, 1999 8:53 AM