Filter
Top Products
25
TROUBLESHOOTING
We do not expect you to have any problems with your TAD-724, but if you do, try
these suggestions. If the TAD still does not operate properly, take it to your local Ra-
dioShack store for assistance.
Problem: Remedy:
The TAD records a busy tone, siren,
beeping, or an operator’s voice instead
of a caller’s message.
Press
SKIP
to play the next mes-
sage.
The TAD does not answer calls. Check all phone line connections.
Make sure the AC adapter is prop-
erly connected.
Delete messages.
Press
ON/OFF.
The outgoing announcement is dis-
torted.
Re-record the announcement,
speaking in a normal tone of voice
about 12 inches from the TAD.
The TAD does not respond to remote
commands.
Carefully re-enter your remote oper-
ation security code. If the TAD fails to
respond, the security code might
have reset to the default code. Enter
the default remote security code
(500).
Make sure that AC power is restored
and the 9V DC adapter is properly
connected to the TAD.
Do not enter commands while the
TAD is making announcements or
sounding tones.
43-724A.fm Page 25 Tuesday, May 16, 2000 4:51 PM