Filter
Top Products
12
For example, if you have Call Waiting,
press
FLASH
to take an incoming call
without disconnecting the current call.
Press
FLASH
again to return to the
first call.
Notes:
• If you do not have special
phone services, pressing
FLASH
might disconnect the
current call.
• The redial memory does not
store a
FLASH
entry or any dig-
its entered before you press
FLASH
.
USING MUTE
To talk to someone else in the room
without the person on the other end of
the phone line hearing your conversa-
tion, press
MUTE
. The MUTE indicator
lights.
To resume your phone conversation,
press
MUTE
again.
VOLUME CONTROL
Adjust
HANDSET VOLUME
to
LO/MED/
HI
on the side of the base to control
volume of the sound you hear through
the handset.
USING TONE SERVICES
ON A PULSE LINE
If you have pulse service and
TONE-
PULSE
is set to
PULSE
, you can tem-
porarily switch to sending tones for
banking services or computer transac-
tions.
Dial the number as usual, then press
at the appropriate place in the call
to change to tone dialing.
The phone automatically returns to
pulse dialing when you end the call.
USING PAUSE
In some telephone systems, you must
dial an access code (9, for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number; however, you must
also store a pause after the access
code to allow the outside line time to
connect.
43-724A.fm Page 12 Tuesday, May 16, 2000 4:51 PM