Radio Shack TAD-1026 Answering Machine User Manual


 
4
This TAD is ETL listed to UL standards
and meets all applicable FCC standards.
This symbol is intended to alert you to
the presence of uninsulated danger-
ous voltage within the product’s enclo-
sure that might be of sufficient
magnitude to constitute a risk of elec-
tric shock. Do not open the product’s
case.
This symbol is intended to inform you
that important operating and mainte-
nance instructions are included in the
literature accompanying this product.
READ THIS BEFORE
INSTALLATION
We have designed your TAD to conform
to federal regulations, and you can con-
nect it to most telephone lines. However,
each device you connect to the phone
line draws power from the phone line.
We refer to this power draw is the de-
vice’s
ringer equivalence number
, or
REN. The REN is on the label on the bot-
tom of the TAD.
If you are using more than one phone or
other device on the line, add up all the
RENs. If the total is more than five (or
three in rural areas), your phone(s)
might not ring and your TAD might not
answer. If ringer operation is impaired,
remove a device from the line.
FCC STATEMENT
Your TAD complies with Part 68 of
FCC
Rules
. You must, upon request, provide
the FCC Registration Number and the
REN to your phone company. Both num-
bers are on the label on the bottom of the
TAD.
You must not connect the TAD to any of
the following:
Coin-operated systems
Party-line systems
Most electronic key phone systems
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION
: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
WARNING
: To reduce the risk of
fire or shock hazard, do not ex-
pose this product to rain or mois-
ture.
!
!
43-786.fm Page 4 Monday, August 16, 1999 8:02 AM