Radio Shack TAD-1026 Answering Machine User Manual


 
22
To play only new messages, hold down
PLAY
for 2 seconds. (If there are no new
messages stored, the TAD says, “You
have no new messages.”)
To adjust the volume, rotate
VOLUME
on the side of the TAD.
After all messages play, the TAD says,
“End of message(s)” and saves all the
messages.
To replay a message while you are lis-
tening to it, press
MEMO
. The current
message starts again from the begin-
ning.
To return to the previous message dur-
ing playback, press
MEMO
twice.
The previous recorded message plays.
To skip to the next message during play-
back, press
CODE
once. The next re-
corded message plays.
To pause while listening to messages,
press
PLAY
.
PS
(pause) appears on the
display.
To resume playback, press
PLAY
again
within 60 seconds. Otherwise, the TAD
beeps twice, stops playback and dis-
plays the total number of messages.
To stop playback at any time, press
STOP/T-SET
. The TAD beeps and resets
to answer calls.
DELETING MESSAGES
To delete a specific message, press
DE-
LETE
once while the message is playing.
The TAD beeps once and
dL
(delete)
briefly appears. The TAD deletes the
current message, then plays the next.
29.epsi
43-786.fm Page 22 Monday, August 16, 1999 8:02 AM